Your default IP address on the Orbi router is 192.168.1.1 or 192.168.0.1.

If you are unable to access Orbilogin.net or orbilogin.com, you can try the troubleshooting steps below.
• Use a connection with your device and the Orbi network.
• Change your browser other by trying with different devices.
• Use this IP address 192.168.0.1 instead of orbilogin.com or Orbilogin.net.
• Make sure your Orbi router is properly connected to your ISP modem.
• If you have changed your IP address in the past, use the change of IP address.

Locate the reset button on the bottom of the Orbi router, then use the paper clip to press and hold the button for 15 seconds. This restart process will take 2-3 minutes to complete.

By configuring Orbi Router as an access point, you can use Orbi Router WiFi instead of WiFi with your existing router. Set up an Orbi router as an access point. Use an Ethernet cable to connect the Orbi router’s Internet port to the router’s LAN port or gateway.

Yes, connect the Orbi Router to your existing router via Ethernet. You have to set the Orbi router to AP mode and disable the current router connection. Existing routers offer routing firewalls and more!

Orbi’s setup process is straightforward, if you’re wondering how to do it. Simply enter the orbi login website link, log in, go to Settings, & then follow the on-screen instructions. After that, you’ll be shown the ropes on how to set up Orbi without any fuss.